- Images
- Videos
The Wood-Mizer BMC300 is a compact and practical machine designed for efficient cleaning of bandsaw blades before sharpening and setting. The BMC300 complements the Wood-Mizer range of blade maintenance equipment and can be used alongside BMS series blade sharpeners and BMT series tooth setters to create a complete and efficient blade resharpening system.
During sawing, contaminants such as resin, sawdust, and other deposits accumulate on the blade surface. These contaminants can reduce cutting quality and accelerate wear on sawmill components, including belts, bearings, and rollers. Before blade resharpening, the blade should be thoroughly cleaned. To make this process fast, effective, and safe, the use of a dedicated blade cleaning machine is recommended.
Instead of time-consuming manual cleaning with various tools, the BMC300 automates the cleaning process using rotating wire brushes. The machine is designed for blades from 2 to 7 m long and 1" to 3" (25,4 – 76,2 mm) wide. During operation, the blade travels through the cleaning area at 3.5 m/min, while the wire brushes rotate at 1400 rpm, effectively removing contaminants from the blade surface. Depending on the brush configuration, both the blade body and tooth area can be cleaned.
Operating the BMC300 is straightforward. The blade is placed on the guide rollers, and the position of the side roller is adjusted according to the blade length. The feed roller is then locked and the top cover is closed. The operator sets the cleaning time, starts the blade feed, and then starts the brush drive. At the end of the cycle, the cleaning result is inspected and, if necessary, the process can be repeated or the cleaning time adjusted.
The BMC300 features an enclosed cabinet design with an ergonomic working height for convenient blade handling. The cleaning area is protected by a hinged top cover with a safety limit switch. The control panel features a main switch, operating controls, and an easily accessible emergency stop button. The machine operates on a 400 V AC, 50 Hz power supply and has a rated power of 2 kW.
Adding a cleaning stage to the sharpening and setting process helps keep blades clean and properly prepared for further resharpening. The BMC 300 delivers consistent cleaning results, reduces time-consuming manual cleaning, and streamlines day-to-day blade maintenance.
